MPP cable pipe

MPP uses modified polypropylene as the main raw material. It is a construction project for laying pipelines, cables and other construction projects in special areas such as roads, railways, buildings, and under river beds without the need for extensive dredging, excavation, and road damage. Compared with the traditional “trenching and burying pipe method”, trenchless power pipe engineering is more adaptable to current environmental protection requirements and eliminates dust, traffic jams and other nuisance factors caused by traditional construction. This technology can also be used in some areas where it is impossible to Pipelines are laid in areas where excavation operations are carried out, such as historical protection areas, downtown areas, crop and farmland protection areas, highways, rivers, etc.
It can be widely used in pipeline projects such as municipal administration, telecommunications, electricity, gas, tap water, and heat.
Urban and rural non-excavation horizontal directional drilling power pipe drainage projects, and open excavation power pipe drainage projects.
Urban and rural non-excavation horizontal directional drilling sewerage and sewage pipe projects. Industrial wastewater discharge project
1. MPP pipe has excellent electrical insulation.
2. MPP pipe has high heat deformation temperature and low temperature impact performance.
3. MPP pipe has higher tensile and compressive properties than HDPE.
4. MPP pipes are light, smooth, have low friction resistance, and can be hot-melt welded butt joints.
5. The long-term use temperature of MPP pipe is between 5℃ and 70℃.
6. Construction instructions
l During the transportation and construction of pipes, it is strictly prohibited to drop, hit, scratch or expose them to the sun.
l During hot-melt butt jointing, the axes of the two tubes must be aligned, and the end faces must be cut vertically and flatly.
l The processing temperature, time, and pressure will be adjusted accordingly depending on the climate conditions.
l The minimum bending radius of the pipe should be ≥75 pipe outer diameter.